HP-ICF-PIM DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, IpAddress, Integer32, Unsigned32, TimeTicks FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TruthValue, RowStatus FROM SNMPv2-TC pimCandidateRPEntry, pimInterfaceEntry, pimComponentEntry, pimRPSetComponent FROM PIM-MIB hpSwitch FROM HP-ICF-OID; hpicfPimMIB MODULE-IDENTITY LAST-UPDATED "200508041619Z" -- August 4, 2005 ORGANIZATION "Hewlett-Packard Company ProCurve Networking Business" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains HP proprietary extensions to the standard PIM MIB (RFC 2934)." REVISION "200508041619Z" -- August 4, 2005 DESCRIPTION "Added PIM-SM objects." REVISION "200406300000Z" -- June 30, 2004 DESCRIPTION "Initial revision." ::= { hpSwitch 20 } -- ********************************************************************** -- The PIM MIB Groups -- ********************************************************************** hpicfPimObjects OBJECT IDENTIFIER ::= { hpicfPimMIB 1 } hpicfPimTraps OBJECT IDENTIFIER ::= { hpicfPimObjects 0 } hpicfPim OBJECT IDENTIFIER ::= { hpicfPimObjects 1 } hpicfPimConformance OBJECT IDENTIFIER ::= { hpicfPimMIB 2 } hpicfPimGroups OBJECT IDENTIFIER ::= { hpicfPimConformance 1 } hpicfPimCompliances OBJECT IDENTIFIER ::= { hpicfPimConformance 2 } -- ********************************************************************** -- Start of MIB objects -- ********************************************************************** hpicfPimAdminStatus OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The operational status of the PIM routing protocol on this router. Default is disabled." DEFVAL { disable } ::= { hpicfPim 1 } hpicfPimStateRefreshInterval OBJECT-TYPE SYNTAX Integer32 (10..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval between successive State Refresh messages originated by this router. Default is 60 seconds." DEFVAL { 60 } ::= { hpicfPim 2 } hpicfPimSPTThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies a threshold for switching to the Shortest Path Tree (SPT) on this router. If the object has the special value of -1, the Shared Tree rooted to the Rendezvous Point (RP) will be used indefinitely on the router. Default is -1." DEFVAL { -1 } ::= { hpicfPim 3 } hpicfPimTrapControl OBJECT-TYPE SYNTAX BITS { neighborLoss(0), hardMrtFull(1), softMrtFull(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the PIM-enabled router will generate SNMP traps for PIM events. The set bit means 'enabled'. - neighborLoss(0) This bit controls whether the notification trap is allowed to be send when the neighbour timer expires and the router has no other neighbours on the same interface with a lower IP address than itself. - hardMrtFull(1) This bit controls whether the notification trap is allowed to be send when the MRT table is full and the error has been originated by hardware. - softMrtFull(2) This bit controls whether the notification trap is allowed to be send when the MRT table is full and the error has been originated by software." ::= { hpicfPim 4 } -- ********************************************************************** -- The PIM Static RP-Set Table -- ********************************************************************** hpicfPimStaticRPSetTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfPimStaticRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing statically configured Rendezvous Points (RPs) for IP multicast group mappings. This information is being used in the PIM Sparse mode only." ::= { hpicfPim 5 } hpicfPimStaticRPSetEntry OBJECT-TYPE SYNTAX HpicfPimStaticRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) in the hpicfPimStaticRPSetTable. NOTE: the pimRPSetComponent is an index that uniquely identifies the component. Each protocol instance connected to a separate domain should have a different index value." INDEX { pimRPSetComponent, hpicfPimStaticRPSetGroupAddress, hpicfPimStaticRPSetGroupMask, hpicfPimStaticRPSetAddress } ::= { hpicfPimStaticRPSetTable 1 } HpicfPimStaticRPSetEntry ::= SEQUENCE { hpicfPimStaticRPSetGroupAddress IpAddress, hpicfPimStaticRPSetGroupMask IpAddress, hpicfPimStaticRPSetAddress IpAddress, hpicfPimStaticRPSetOverride TruthValue, hpicfPimStaticRPSetRowStatus RowStatus } hpicfPimStaticRPSetGroupAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address which, when combined with hpicfPimStaticRPSetGroupMask, gives the group prefix for which this entry contains information about the statically configured RP." ::= { hpicfPimStaticRPSetEntry 1 } hpicfPimStaticRPSetGroupMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address mask which, when combined with hpicfPimStaticRPSetGroupAddress, gives the group prefix for which this entry contains information about the statically configured RP." ::= { hpicfPimStaticRPSetEntry 2 } hpicfPimStaticRPSetAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of statically configured RP for the given IP multicast group(s)." ::= { hpicfPimStaticRPSetEntry 3 } hpicfPimStaticRPSetOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If true, indicates that the router should ignore the information learned by a BSR if there is a conflict between the information this static entry contains and the information that is learned by the BSR. Default is false." DEFVAL { false } ::= { hpicfPimStaticRPSetEntry 4 } hpicfPimStaticRPSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { hpicfPimStaticRPSetEntry 5 } -- ********************************************************************** -- The Extensions to the PIM Interface Table (RFC 2934) -- ********************************************************************** hpicfPimIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfPimIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HP extensions to the pimInterfaceTable." ::= { hpicfPim 6 } hpicfPimIfEntry OBJECT-TYPE SYNTAX HpicfPimIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HP extensions for an entry in the pimInterfaceTable." AUGMENTS { pimInterfaceEntry } ::= { hpicfPimIfTable 1 } HpicfPimIfEntry ::= SEQUENCE { hpicfPimIfAddress IpAddress, hpicfPimIfTrigHelloInterval Integer32, hpicfPimIfHelloHoldtime Integer32, hpicfPimIfLanPruneDelay TruthValue, hpicfPimIfPropagationDelay Integer32, hpicfPimIfOverrideInterval Integer32, hpicfPimIfGenerationID TruthValue, hpicfPimIfJoinPruneHoldtime Unsigned32, hpicfPimIfGraftRetryInterval Integer32, hpicfPimIfMaxGraftRetries Integer32, hpicfPimIfSRTTLThreshold Unsigned32, hpicfPimIfLanDelayEnabled TruthValue, hpicfPimIfSRCapable TruthValue, hpicfPimIfDRPriority Unsigned32, hpicfPimIfNBRTimeout Integer32 } hpicfPimIfAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This is copy of pimInterfaceAddress with read-create access. PIM uses this source address to send its protocol packets out on this interface. This address can be set to one of IP addresses of the interface or 255.255.255.255 if the address is determined dynamically based on the current IP configuration. The currently used source address is value of pimInterfaceAddress in the latter case." ::= { hpicfPimIfEntry 1 } hpicfPimIfTrigHelloInterval OBJECT-TYPE SYNTAX Integer32 (0..5) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum time before a triggered PIM Hello message is transmitted on this interface. Default is 5 seconds." DEFVAL { 5 } ::= { hpicfPimIfEntry 2 } hpicfPimIfHelloHoldtime OBJECT-TYPE SYNTAX Integer32 (17..1050) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value set in the Holdtime field of Hello messages transmitted on this interface. This should be 3.5 times the value of pimInterfaceHelloInterval. Default is 105 seconds." DEFVAL { 105 } ::= { hpicfPimIfEntry 3 } hpicfPimIfLanPruneDelay OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Turns the LAN Prune Delay Option off and on on this interface. Default is true." DEFVAL { true } ::= { hpicfPimIfEntry 4 } hpicfPimIfPropagationDelay OBJECT-TYPE SYNTAX Integer32 (250..2000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value inserted into the LAN Prune Delay field of a LAN Prune Delay option on this interface. Default is 500 milliseconds." DEFVAL { 500 } ::= { hpicfPimIfEntry 5 } hpicfPimIfOverrideInterval OBJECT-TYPE SYNTAX Integer32 (500..6000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value inserted into the Override Interval field of a LAN Prune Delay option on this interface. Default is 2500 milliseconds." DEFVAL { 2500 } ::= { hpicfPimIfEntry 6 } hpicfPimIfGenerationID OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Turns the Generation ID Option off and on on this interface. Default is false." DEFVAL { false } ::= { hpicfPimIfEntry 7 } hpicfPimIfJoinPruneHoldtime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value inserted into the Holdtime field of a Join/ Prune message sent on this interface. The value should be 3.5 times pimInterfaceJoinPruneInterval. Default is 210 seconds." DEFVAL { 210 } ::= { hpicfPimIfEntry 8 } hpicfPimIfGraftRetryInterval OBJECT-TYPE SYNTAX Integer32 (1..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The interval a PIM router waits for a Graft Ack before re-sending a Graft on this interface. Default is 3 seconds." DEFVAL { 3 } ::= { hpicfPimIfEntry 9 } hpicfPimIfMaxGraftRetries OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of times this router will re-send a Graft on this interface. Default is 2." DEFVAL { 2 } ::= { hpicfPimIfEntry 10 } hpicfPimIfSRTTLThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Time To Live in a PIM-DM State Refresh message at which it is not forwarded on this interface. Default is 0." DEFVAL { 0 } ::= { hpicfPimIfEntry 11 } hpicfPimIfLanDelayEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option." ::= { hpicfPimIfEntry 12 } hpicfPimIfSRCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the State Refresh Capable Option." ::= { hpicfPimIfEntry 13 } hpicfPimIfDRPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Designated Router Priority inserted into the DR priority option on this interface. Default is 1." DEFVAL { 1 } ::= { hpicfPimIfEntry 14 } hpicfPimIfNBRTimeout OBJECT-TYPE SYNTAX Integer32 (60..8000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval after which the router will consider a neighbour to not be present, if no PIM Hello messages arrived on the interface. Default is 180 seconds." DEFVAL { 180 } ::= { hpicfPimIfEntry 15 } -- ********************************************************************** -- The Extensions to the PIM Component Table (RFC 2934) -- ********************************************************************** hpicfPimComponentTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfPimComponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HP extensions to the pimComponentTable - the (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. Typically, a PIM-SM router will be a member of exactly one domain, however, the table also supports routers which may form a border between two PIM-SM domains and do not forward Bootstrap messages between them." ::= { hpicfPim 7 } hpicfPimComponentEntry OBJECT-TYPE SYNTAX HpicfPimComponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HP extensions for an entry in the pimComponentTable." AUGMENTS { pimComponentEntry } ::= { hpicfPimComponentTable 1 } HpicfPimComponentEntry ::= SEQUENCE { -- ------------------ -- read-write objects -- ------------------ hpicfPimComponentCBSRAdminStatus INTEGER, hpicfPimComponentCBSRAddress IpAddress, hpicfPimComponentCBSRPriority Integer32, hpicfPimComponentCBSRHashMaskLength Integer32, hpicfPimComponentCBSRMessageInterval Integer32, hpicfPimComponentCRPPriority Integer32, -- ------------------ -- read-only objects -- ------------------ hpicfPimComponentCRPAdvInterval Unsigned32, hpicfPimComponentBSRPriority Unsigned32, hpicfPimComponentBSRHashMaskLength Unsigned32, hpicfPimComponentBSRUpTime TimeTicks, hpicfPimComponentBSRNextMessage TimeTicks } hpicfPimComponentCBSRAdminStatus OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This objects specifies whether or not the router configured to be a Candidate BSR for the local PIM region. Default is disabled." DEFVAL { disable } ::= { hpicfPimComponentEntry 1 } hpicfPimComponentCBSRAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address the Candidate BSR router will advertise for the local PIM region." ::= { hpicfPimComponentEntry 2 } hpicfPimComponentCBSRPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority for Candidate BSR router. In BSR election process the candidate BSR with the highest (numerically bigger) priority becomes the BSR. If the priority values are the same, the router with the larger IP address is the BSR. Default is 0." DEFVAL { 0 } ::= { hpicfPimComponentEntry 3 } hpicfPimComponentCBSRHashMaskLength OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the length (in bits) of a multicast group address to use when mapping a group to one of the candidate RPs from the RP-Set whose group-prefix includes the group. The recommended value for IPv4 is 30, for IPv6 is 126. Default is 30." DEFVAL { 30 } ::= { hpicfPimComponentEntry 4 } hpicfPimComponentCBSRMessageInterval OBJECT-TYPE SYNTAX Integer32 (5..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If this router is the elected BSR, then this is the interval for sending (multicast out) periodic Bootstrap (RP-Set) messages on all PIM SM interfaces. Default is 60 seconds." DEFVAL { 60 } ::= { hpicfPimComponentEntry 5 } hpicfPimComponentCRPPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority for the Candidate RP for the local PIM domain. Determines which Candidate RPs get selected by the BSR to be in the RP Set. The smaller value means the higher priority (a value of zero is the highest possible priority). Default is 192." DEFVAL { 192 } ::= { hpicfPimComponentEntry 6 } hpicfPimComponentCRPAdvInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval at which the Candidate RP transmits (unicast to the elected BSR) advertise messages in the local PIM domain." ::= { hpicfPimComponentEntry 7 } hpicfPimComponentBSRPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the Bootstrap Router (BSR) elected for the local PIM region." ::= { hpicfPimComponentEntry 8 } hpicfPimComponentBSRHashMaskLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The hash mask length of the elected Bootstrap Router (BSR)." ::= { hpicfPimComponentEntry 9 } hpicfPimComponentBSRUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Length of time that the elected Bootstrap Router (BSR) has been up." ::= { hpicfPimComponentEntry 10 } hpicfPimComponentBSRNextMessage OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time in which the next bootstrap message is due from the elected Bootstrap Router (BSR)." ::= { hpicfPimComponentEntry 11 } -- ********************************************************************** -- PIM Notifications Trap Definitions -- ********************************************************************** hpicfPimHardMRTFull NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification signifies that the MRT table is full and the error has been originated by hardware. This trap should be generated whenever a multicast flow or MRT entry cannot be added." ::= { hpicfPimTraps 1 } hpicfPimSoftMRTFull NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification signifies that the MRT table is full and the error has been originated by software. This trap should be generated whenever a multicast flow or MRT entry cannot be added." ::= { hpicfPimTraps 2 } -- ********************************************************************** -- Conformance Information -- ********************************************************************** hpicfPimNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hpicfPimHardMRTFull, hpicfPimSoftMRTFull } STATUS current DESCRIPTION "A collection of notifications that extends notifications defined in RFC 2934 - used for signalling important PIM events." ::= { hpicfPimGroups 1 } hpicfPimBaseGroup OBJECT-GROUP OBJECTS { hpicfPimAdminStatus, hpicfPimStateRefreshInterval, hpicfPimSPTThreshold, hpicfPimTrapControl } STATUS current DESCRIPTION "A collection of objects to support basic PIM configuration information on HP routers." ::= { hpicfPimGroups 2 } hpicfPimStaticRPSetMappingGroup OBJECT-GROUP OBJECTS { hpicfPimStaticRPSetOverride, hpicfPimStaticRPSetRowStatus } STATUS current DESCRIPTION "A collection of objects to support management of static Rendezvous Point (RP) to IP multicast group mappings." ::= { hpicfPimGroups 3 } hpicfPimSparseIfGroup OBJECT-GROUP OBJECTS { hpicfPimIfAddress, hpicfPimIfTrigHelloInterval, hpicfPimIfHelloHoldtime, hpicfPimIfLanPruneDelay, hpicfPimIfPropagationDelay, hpicfPimIfOverrideInterval, hpicfPimIfGenerationID, hpicfPimIfJoinPruneHoldtime, hpicfPimIfLanDelayEnabled, hpicfPimIfDRPriority, hpicfPimIfNBRTimeout } STATUS current DESCRIPTION "A collection of objects that extends objects defined in pimInterfaceTable and used to support management of interfaces operating in PIM Sparse Mode." ::= { hpicfPimGroups 4 } hpicfPimDenseIfGroup OBJECT-GROUP OBJECTS { hpicfPimIfAddress, hpicfPimIfTrigHelloInterval, hpicfPimIfHelloHoldtime, hpicfPimIfLanPruneDelay, hpicfPimIfPropagationDelay, hpicfPimIfOverrideInterval, hpicfPimIfGenerationID, hpicfPimIfJoinPruneHoldtime, hpicfPimIfGraftRetryInterval, hpicfPimIfMaxGraftRetries, hpicfPimIfSRTTLThreshold, hpicfPimIfLanDelayEnabled, hpicfPimIfSRCapable, hpicfPimIfDRPriority } STATUS current DESCRIPTION "A collection of objects that extends objects defined in pimInterfaceTable and used to support management of interfaces operating in PIM Dense Mode." ::= { hpicfPimGroups 5 } hpicfPimComponentGroup OBJECT-GROUP OBJECTS { hpicfPimComponentCBSRAdminStatus, hpicfPimComponentCBSRAddress, hpicfPimComponentCBSRPriority, hpicfPimComponentCBSRHashMaskLength, hpicfPimComponentCBSRMessageInterval, hpicfPimComponentCRPPriority, hpicfPimComponentCRPAdvInterval, hpicfPimComponentBSRPriority, hpicfPimComponentBSRHashMaskLength, hpicfPimComponentBSRUpTime, hpicfPimComponentBSRNextMessage } STATUS current DESCRIPTION "A collection of objects that extends objects defined in pimComponentTable (RFC 2934)." ::= { hpicfPimGroups 6 } -- ********************************************************************** -- Compliance statements -- ********************************************************************** hpicfPimSparseMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP routers running PIM Sparse Mode and implementing the HP-ICF-PIM MIB." MODULE -- this module MANDATORY-GROUPS { hpicfPimBaseGroup, hpicfPimStaticRPSetMappingGroup, hpicfPimSparseIfGroup, hpicfPimComponentGroup } ::= { hpicfPimCompliances 1 } hpicfPimDenseMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP routers running PIM Dense Mode and implementing the HP-ICF-PIM MIB." MODULE -- this module MANDATORY-GROUPS { hpicfPimBaseGroup, hpicfPimDenseIfGroup } ::= { hpicfPimCompliances 2 } END