HP-ICF-RIP DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TruthValue, RowStatus FROM SNMPv2-TC rip2IfConfEntry FROM RIPv2-MIB IANAipRouteProtocol FROM IANA-RTPROTO-MIB hpSwitch FROM HP-ICF-OID; hpicfRip MODULE-IDENTITY LAST-UPDATED "200305130217Z" -- May 13, 2003 ORGANIZATION "Hewlett-Packard Company Workgroup Networks Division" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains HP proprietary extensions to the standard RIP MIB." REVISION "200305130217Z" -- May 13, 2003 DESCRIPTION "Added an object for configuring a default administrative distance for RIP routes." REVISION "200111130339Z" -- November 13, 2001 DESCRIPTION "Initial revision." ::= { hpSwitch 13 } hpicfRipObjects OBJECT IDENTIFIER ::= { hpicfRip 1 } hpicfRipGeneral OBJECT IDENTIFIER ::= { hpicfRipObjects 1 } hpicfRipAdminStatus OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The operational status of the RIP routing protocol." ::= { hpicfRipGeneral 1 } hpicfRipDefaultMetric OBJECT-TYPE SYNTAX INTEGER ( 1..15 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Default metric value for routes redistributed to RIP." ::= { hpicfRipGeneral 2 } hpicfRipAutoSummary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A flag indicating whether RIP should perform border filtering on subnet routes when crossing a network boundary. Interfaces that are configured for RIPv1 or RIPv1-compatible mode must always filter subnets at network boundaries. Interfaces configured for RIPv2 mode will only filter subnets if this flag is set to 'true'. Setting this to 'true' will result in all subnets within a class-based network to be summarized using a single route for the subnet number, which can decrease the size of the routing tables. However, if any networks are discontiguous, this flag should be set to 'false' for proper routing." ::= { hpicfRipGeneral 3 } hpicfRipDistance OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative distance to associate with routes learned by RIP. Routes with lower distances are preferred. By default, RIP routes have an administrative distance of 120." ::= { hpicfRipGeneral 4 } hpicfRipIfConfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfIfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HP extensions to the rip2IfConfTable." ::= { hpicfRipObjects 2 } hpicfRipIfConfEntry OBJECT-TYPE SYNTAX HpicfIfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HP extensions for a single RIP interface." AUGMENTS { rip2IfConfEntry } ::= { hpicfRipIfConfTable 1 } HpicfIfConfEntry ::= SEQUENCE { hpicfRipIfConfDoPoison TruthValue, hpicfRipIfConfCost Integer32 } hpicfRipIfConfDoPoison OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Flag indicating if router should perform poison reverse on this interface." DEFVAL { true } ::= { hpicfRipIfConfEntry 1 } hpicfRipIfConfCost OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "RIP metric for this interface." DEFVAL { 1 } ::= { hpicfRipIfConfEntry 2 } hpicfRipRedistTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfRipRedistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for configuring route redistribution into RIP." ::= { hpicfRipObjects 3 } hpicfRipRedistEntry OBJECT-TYPE SYNTAX HpicfRipRedistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table for configuring route redistribution into RIP from a single source protocol. Entries in this table are not created dynamically. There will be a single entry for each supported source protocol." INDEX { hpicfRipRedistSrcProto } ::= { hpicfRipRedistTable 1 } HpicfRipRedistEntry ::= SEQUENCE { hpicfRipRedistSrcProto IANAipRouteProtocol, hpicfRipRedistEnabled TruthValue } hpicfRipRedistSrcProto OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "Source protocol to redistribute routes from." ::= { hpicfRipRedistEntry 1 } hpicfRipRedistEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A flag indicating whether RIP should redistribute routes from this source protocol." ::= { hpicfRipRedistEntry 2 } hpicfRipRedistRestrictTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfRipRedistRestrictEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of route prefixes for filtering out routes that RIP should not redistribute. Any route that is contained by a range in this table (in other words, has a longer mask than that specified by hpicfRipRedistRestrictMask and where the route destination ANDed with the hpicfRipRedistRestrictMask is equal to hpicfRipRedistRestrictAddr) will not be redistributed as an external route by RIP." ::= { hpicfRipObjects 4 } hpicfRipRedistRestrictEntry OBJECT-TYPE SYNTAX HpicfRipRedistRestrictEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single entry in the table. Any route, regardless of source protocol which is contained within the specified range will not be redistributed into RIP. Entries in this table are created dynamically using the hpicfRipRedistRestrictStatus object." INDEX { hpicfRipRedistRestrictAddr, hpicfRipRedistRestrictMask } ::= { hpicfRipRedistRestrictTable 1 } HpicfRipRedistRestrictEntry ::= SEQUENCE { hpicfRipRedistRestrictAddr IpAddress, hpicfRipRedistRestrictMask IpAddress, hpicfRipRedistRestrictStatus RowStatus } hpicfRipRedistRestrictAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the range of route entries to exclude from redistribution into RIP." ::= { hpicfRipRedistRestrictEntry 1 } hpicfRipRedistRestrictMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mask for the range of route entries to exclude from redistribution into RIP." ::= { hpicfRipRedistRestrictEntry 2 } hpicfRipRedistRestrictStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { hpicfRipRedistRestrictEntry 3 } hpicfRipConformance OBJECT IDENTIFIER ::= { hpicfRip 2 } hpicfRipGroups OBJECT IDENTIFIER ::= { hpicfRipConformance 1 } hpicfRipBaseGroup OBJECT-GROUP OBJECTS { hpicfRipAdminStatus, hpicfRipDefaultMetric, hpicfRipAutoSummary } STATUS current DESCRIPTION "Basic RIP configuration information that is not present in the standard RIP MIB." ::= { hpicfRipGroups 1 } hpicfRipIfGroup OBJECT-GROUP OBJECTS { hpicfRipIfConfDoPoison, hpicfRipIfConfCost } STATUS current DESCRIPTION "RIP interface configuration information that is not present in the standard RIP MIB." ::= { hpicfRipGroups 2 } hpicfRipRedistGroup OBJECT-GROUP OBJECTS { hpicfRipRedistEnabled, hpicfRipRedistRestrictStatus } STATUS current DESCRIPTION "A collection of objects for controlling the redistribution of external routes by RIP." ::= { hpicfRipGroups 3 } hpicfRipDistanceGroup OBJECT-GROUP OBJECTS { hpicfRipDistance } STATUS current DESCRIPTION "A collection of objects for configuring the administrative distance of routes learned by RIP." ::= { hpicfRipGroups 4 } hpicfRipCompliances OBJECT IDENTIFIER ::= { hpicfRipConformance 2 } hpicfRipCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Routing switches that support RIP." MODULE MANDATORY-GROUPS { hpicfRipBaseGroup, hpicfRipIfGroup } GROUP hpicfRipRedistGroup DESCRIPTION "This group is mandatory for systems that support route redistribution." ::= { hpicfRipCompliances 1 } END