HP-ICF-UDLD-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32, Counter32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF MacAddress, TimeInterval FROM SNMPv2-TC ifIndex FROM IF-MIB hpSwitch FROM HP-ICF-OID; hpicfUdldMIB MODULE-IDENTITY LAST-UPDATED "200604100000Z" --April 10, 2006 ORGANIZATION "Hewlett-Packard Company ProCurve Networking Business" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module describes objects to configure the Unidirectional Link Detection (UDLD) feature." REVISION "200604100000Z" DESCRIPTION "Initial revision." ::= { hpSwitch 33 } -- ********************************************************************** -- The UDLD MIB Groups -- ********************************************************************** hpicfUdldNotifications OBJECT IDENTIFIER ::= { hpicfUdldMIB 0 } hpicfUdldObjects OBJECT IDENTIFIER ::= { hpicfUdldMIB 1 } hpicfUdldConformance OBJECT IDENTIFIER ::= { hpicfUdldMIB 2 } -- ********************************************************************** -- The UDLD MIB Objects -- ********************************************************************** hpicfUdldConfig OBJECT IDENTIFIER ::= { hpicfUdldObjects 1 } hpicfUdldStats OBJECT IDENTIFIER ::= { hpicfUdldObjects 2 } -- ********************************************************************** -- Start of MIB objects -- ********************************************************************** hpicfUdldConfigTimeInterval OBJECT-TYPE SYNTAX Unsigned32 (10..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval in seconds at which the UDLD enabled ports exchange proprietary pulse packet. Here 10 is 1 sec, 11 is 1.1 sec, and so on. The default value for hpicfUdldConfigTimeInterval object is 5 seconds." DEFVAL { 50 } -- five second ::= { hpicfUdldConfig 1 } hpicfUdldConfigMaxRetries OBJECT-TYPE SYNTAX Unsigned32 (3..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of retries to wait for a response. The default value for hpicfUdldConfigMaxRetries object is 4." DEFVAL { 4 } ::= { hpicfUdldConfig 2 } -- Start of hpicfUdldPortConfigTable ************************************ hpicfUdldPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfUdldPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table that controls UDLD status on individual ports." ::= { hpicfUdldConfig 3 } hpicfUdldPortConfigEntry OBJECT-TYPE SYNTAX HpicfUdldPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfUdldPortConfigTable." INDEX { ifIndex } ::= { hpicfUdldPortConfigTable 1 } HpicfUdldPortConfigEntry ::= SEQUENCE { hpicfUdldPortAdminStatus INTEGER, hpicfUdldPortVlanId Integer32 } hpicfUdldPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The hpicfUdldPortAdminStatus can be enabled/disabled The value enable(1) means that UDLD is enabled. the value disable(2) means that UDLD is disabled." ::= { hpicfUdldPortConfigEntry 1 } hpicfUdldPortVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan id associated with tagged UDLD control packets. The value of 0 indicates that UDLD control packets are untagged." ::= { hpicfUdldPortConfigEntry 2 } -- End of hpicfUdldPortConfigTable ************************************** -- -- *********************************************************** -- -- UDLD S T A T S -- -- *********************************************************** -- hpicfUdldPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfUdldPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing UDLD statistics for individual ports." ::= { hpicfUdldStats 1 } hpicfUdldPortStatsEntry OBJECT-TYPE SYNTAX HpicfUdldPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "UDLD statistics for a particular physical port." INDEX { ifIndex } ::= { hpicfUdldPortStatsTable 1 } HpicfUdldPortStatsEntry ::= SEQUENCE { hpicfUdldStatsPortCurrentState INTEGER, hpicfUdldStatsPortNeighborMAC MacAddress, hpicfUdldStatsPortNeighborPort Integer32, hpicfUdldStatsPortTotalTx Counter32, hpicfUdldStatsPortTotalRx Counter32, hpicfUdldStatsPortNumStateChange Counter32, hpicfUdldStatsPortStatus Integer32 } hpicfUdldStatsPortCurrentState OBJECT-TYPE SYNTAX INTEGER { unknown(0), offline(1), failure(2), up(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The desired status of UDLD on a port. If the associated hpicfUdldStatsPortCurrentState object has a value of 'offline(1)', then the port or udld is administratively disabled. If the associated hpicfUdldStatsPortCurrentState object has a value of 'failure(2)', then the port and udld are administratively enabled, but udld packets are not being received successfully. Link may or may not be present. If the associated hpicfUdldStatsPortCurrentState object has a value of 'up(3)', then udld is enabled and udld packets are being received successfully in both directions." ::= { hpicfUdldPortStatsEntry 1 } hpicfUdldStatsPortNeighborMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the adjacent switch." ::= { hpicfUdldPortStatsEntry 2 } hpicfUdldStatsPortNeighborPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the adjacent switch." ::= { hpicfUdldPortStatsEntry 3 } hpicfUdldStatsPortTotalTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of UDLD control packets sent from this port." ::= { hpicfUdldPortStatsEntry 4 } hpicfUdldStatsPortTotalRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of UDLD control packets received on this port." ::= { hpicfUdldPortStatsEntry 5 } hpicfUdldStatsPortNumStateChange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of state transitions." ::= { hpicfUdldPortStatsEntry 6 } hpicfUdldStatsPortStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates whether the port is blocked by UDLD or not." ::= { hpicfUdldPortStatsEntry 7 } -- -- *********************************************************** -- -- UDLD M I B N O T I F I C A T I O N S -- -- *********************************************************** -- hpicfUdldNotificationPrefix OBJECT IDENTIFIER ::= { hpicfUdldNotifications 0 } hpicfUdldLinkfault NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "This notification is generated when the link failure occurs." ::= { hpicfUdldNotificationPrefix 1 } hpicfUdldLinkUp NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "This notification is generated when UDLD link goes from down to up." ::= { hpicfUdldNotificationPrefix 2 } -- -- *********************************************************** -- -- UDLD M I B C O N F O R M A N C E -- -- *********************************************************** -- hpicfUdldCompliances OBJECT IDENTIFIER ::= { hpicfUdldConformance 1 } hpicfUdldGroups OBJECT IDENTIFIER ::= { hpicfUdldConformance 2 } -- compliance statements hpicfUdldCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the UDLD MIB." MODULE -- this module MANDATORY-GROUPS { hpicfUdldPortConfigGroup, hpicfUdldPortStatsGroup, hpicfUdldNotificationGroup } GROUP hpicfUdldNotificationGroup DESCRIPTION "The notifications used for signalling link failure." ::= { hpicfUdldCompliances 1 } -- MIB groupings hpicfUdldPortConfigGroup OBJECT-GROUP OBJECTS { hpicfUdldConfigTimeInterval, hpicfUdldConfigMaxRetries, hpicfUdldPortAdminStatus, hpicfUdldPortVlanId } STATUS current DESCRIPTION "The collection of objects which are used to configure the UDLD implementation behavior. This group is mandatory for ports which implement the UDLD." ::= { hpicfUdldGroups 1 } hpicfUdldPortStatsGroup OBJECT-GROUP OBJECTS { hpicfUdldStatsPortCurrentState, hpicfUdldStatsPortNeighborMAC, hpicfUdldStatsPortNeighborPort, hpicfUdldStatsPortTotalTx, hpicfUdldStatsPortTotalRx, hpicfUdldStatsPortNumStateChange, hpicfUdldStatsPortStatus } STATUS current DESCRIPTION "The collection of objects which are used to represent UDLD statistics. This group is mandatory for ports which implement the UDLD." ::= { hpicfUdldGroups 2 } hpicfUdldNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hpicfUdldLinkfault,hpicfUdldLinkUp } STATUS current DESCRIPTION "Notification used for signaling change in Link state." ::= { hpicfUdldGroups 3 } END